德國WALTER ZEPF AL 200W 切削液

産品名稱    德國WALTER ZEPF AL 200W 切削液 
品牌          Walter ZEPF
産地          德國
型号          AL 200W
包裝規格    200L
德國WALTER ZEPF AL 200W 切削液産品描述

用在有色金屬加工方面,德國WALTER ZEPF AL 200W 切削液潤滑油顯赫的特點是摩察系數很低，潤滑能力強。可通過澆注，軋輥和噴淋方式進行塗層。可用堿性清潔系統很方便的從工件上去除。WALTER ZEPF AL 200W 切削液潤滑油對人體皮膚無害，無毒性，對生态無影響，可快速降解。

适用範圍：
鋁材和有色金屬深拉，滾軋，擠壓和軋制。
切削成型加工（鋸加工，車加工，銑加工和鑽加工等）鋁合金的鍛造加工。
需節能的潤滑系統。

形狀：液體      
顔色：透明      
氣體：溫和    
密度：約0.91gr/cm3    
凝固點：-15℃
燃點：＞+200℃  
粘度：（+40℃）：app.100mm2/s    
毒性：LD50（Ratte oral）＞5.000mg/kg
生态：按VwVwS 1999年5月17号版本，對水源無害。
危險品等級VO:非危險品等級      
氯含量：無

另供應本品牌其它型号：

                Aquagrease-240  

                Aquagrease-300

                AR-1 EP

                AR-2

                AR-4

                AR-12-K

                AR-280

                WG-1-D

品牌介紹

                Walter Zepf Schmierungstechnik——潤滑油專家

                50多年來，Zepf Schmierungstechnik代表了用于日常和極端應用的可靠和高性能的潤滑劑。

原裝進口、現貨供應、品種齊全、價格優惠、品質保障：提供原廠質保書(COA)、進口報關單、原産地證明等進口手續及品質保證文件。咨詢電話：13816815184

同品牌型号系列如下

液壓油和齒輪油

半合成液壓油和齒輪油：

GR-32: Semi-synthetic gear oil VG 32

GR-36: Semi-synthetic gear oil VG 36

GR-46: Semi-synthetic gear oil VG 46

GR-10: Semi-synthetic gear oil VG 68

GR-100: Semi-synthetic gear oil VG 100

GR-150: Semi-synthetic gear oil VG 150

GR-220: Semi-synthetic gear oil VG 220

GR-320: Semi-synthetic gear oil VG 320

GR-460: Semi-synthetic gear oil VG 460

全合成液壓油和齒輪油

ZVG-10: Fully synthetic hydraulic oil VG 10

ZX-36-Synthex: Fully synthetic hydraulic and gear oil VG 32

ZX-10-Synthex: Fully synthetic hydraulic and gear oil VG 46

ZX-46-Synthex: Fully synthetic hydraulic and gear oil VG 46

ZX-50: Water-miscible hydraulic fluid VG 46

ZX-60-Synthex: Fully synthetic hydraulic and gear oil VG 68

ZX-100-Synthex: Fully synthetic hydraulic and gear oil VG 100

ZX-30-Synthex: Fully synthetic hydraulic and gear oil VG 100

ZX-15-Synthex: Fully synthetic hydraulic and gear oil VG 150

ZX-220-Synthex: Fully synthetic hydraulic and gear oil VG 220

ZX-320-Synthex: Fully synthetic hydraulic and gear oil VG 320

ZX-680-Synthex: Fully synthetic hydraulic and gear oil VG 680

ZX-400-Synthex: Fully synthetic hydraulic and gear oil VG 220

Z-200: Wear-protection-compound

潤滑脂Greases

水電渦輪機專用潤滑脂Water Turbine Greases

Aquagrease 240: Water turbine grease NLGI 2, biodegradable

Aquagrease 300: Water turbine grease NLGI 1, biodegradable

AR-7: Water turbine grease

Aqualub-S-III: Adhering compound for wire ropes and open gears in the area of hydraulic engineering

機械工具用潤滑脂Machine Tools Greases

AR-1 EP: Grease for highest demands NLGI 00

AR-2 MW EP: Grease for highest demands NLGI 1

AR-3: Grease for slide and rolling bearings, high rotation speeds

AR-4: Low temperature grease up to -60°C

AR-10: EP-special-grease for gears

AR-12: High temperature grease

AR-12 K: High temperature grease

AR-12-KT/VO: High temperature gear grease

AR-210: Ca-12-Hydroxistearat soap-based grease

AR-210-F: Ca-12-Hydroxistearat soap-based grease with solids

AR-280: Special grease for friction and antifriction bearings, high-temperature

AR-280-N: Special grease for friction and antifriction bearings, high-temperature with solids

AR-280/000: Special grease  for gears and friction bearings, slideways and steerings

AR-280/1-2: Grease for antifriction bearings for centralized lubrication systems and for dusty working conditions

AR-420: Special grease for wire ropes, gears, friction and antifriction bearings

FE-12 BG/MW: Fitting lubricant against fretting corrosion

Slip paste R: lubrication of prestressed seals

LS 0/1/2/3: Lithium soap greases

LS-2-F: Special Li-soap grease with solids

Supralin-ZX-400: Special grease for sliding surfaces up to -55°C and for seat adjusters

Ultra-Therm: Anti-corrosion grease

Ultra-Therm MTU: Fitting lubricant for extreme thermal strains

Ultra-Therm paste: High-temperature grease

WG-1-D: High-performance long-time grease with solids

ZX-400: Fully synthetic EP-gear grease

金屬成型潤滑劑/加工液Forming Lubricants

微量潤滑Minimal Quantity Lubrication

M-1: Forming fluid for aluminum and its alloys up to about 3mm sheet thickness, drilling, milling

M-2: Forming oil for ferrous metals, up to about 4mm sheet thickness cutting forming

M-3: Forming fluid for iron alloys, aluminum and non-ferrous metals both cutting and non-cutting

M-4: Forming oil for aluminum and non-ferrous metals, no copper corrosion

M-5: Forming fluid for drawing and pressings, drying

水溶性産品Water-Miscibles

Rayon-2: Water-miscible deep drawing concentrate

Rayon-III-K: Water-miscible drawing fluid for steel and aluminum both cutting and non-cutting, extremely low coefficient of friction

Rayon-4: Water-miscible forming concentrate for iron alloys, manufacturing rims, deep drawing of wheel disks

非水溶性産品Non-Water-Miscibles

Rayon-280: High-performance drawing oil for steel sheets up to about 10mm

Ultra-Finish Fluid: Forming oil for hardest forming operations, C-steel, stainless steels, IHV

Z-26: Forming oil for hardest forming operations,  C-steel, stainless steels, hard aluminum alloys, sawing of problematic alloys, IHV

Z-300: Forming oil for hardest forming operations without phosphating plates

ZVG-20: Forming oil for rolling high-strength iron alloys with very low coefficient of friction. E.g. production of needles and body sheets

Ultra-Finish Fluid: Special drawing oil for hardest forming operations both cutting and non-cutting, stainless steel, C-steel, IHV

ZX-Antichlor-20: Special drawing oil for forming of steel and aluminum

ZX-Antichlor-20 SD: Scrubbing oil for forming body sheets and other covering panels in the automotive industry

ZX-60-GB: Slipway oil for hardest loads, forging hammer tracks etc.

Z-AC-80: Impact extrusion oil

*

*

*

*

*

*看不清?換一張

立即提交

• 上一個：德國Walter ZEPF AR-1 EP潤滑脂
• 下一個：ULTRA-THERM-MONTAGEPASTE-MTU 組裝潤滑劑

相關産品

• 

  德國Walter ZEPF AR-1 EP潤滑脂

• 

  ULTRA-THERM-MONTAGEPASTE-MTU 組裝潤滑劑

• 

  WALTER ZEPF AL 200W切削液